power system analysis and design by j duncan glover and sarma ebook

E-Book Details:
Title:
Power system analysis and design
Publisher:
Cengage Learning, 2008
Author:
J. Duncan Glover, Mulukutla S. Sarma, Thomas Jeffrey Overbye, Thomas J. Overbye
Edition:
4, illustrated
Format:
PDF
ISBN:
0534548849
EAN:
9780534548841
No.ofPages:
770
Book Description:
The new edition of Power Systems Analysis and Design text provides students with an introduction to the basic concepts of power systems along with tools to aid them in applying these skills to real world situations. Physical concepts are highlighted while also giving necessary attention to mathematical techniques. Both theory and modeling are developed from simple beginnings so that they can be readily extended to new and complex situations. The authors incorporate new tools and material to aid students with design issues and reflect recent trends in the field.

Table of Contents:
UNIT – I Economic Operation of Power Systems-1
Optimal operation of Generators in Thermal Power Stations, - heat rate Curve – Cost Curve – Incremental fuel and Production costs, input-output characteristics, Optimum generation allocation with line losses neglected.
UNIT – IIEconomic Operation of Power Systems-2
Optimum generation allocation including the effect of transmission line losses – Loss Coefficients, General transmission line loss formula.
UNIT – III Hydrothermal Scheduling
Optimal scheduling of Hydrothermal System: Hydroelectric power plant models, Scheduling problems-Short term Hydrothermal scheduling problem.
UNIT –IV Modelling of Turbine, Generator and Automatic Controllers
Modelling of Turbine: First order Turbine model, Block Diagram representation of Steam Turbines and Approximate Linear Models. Modelling of Generator (Steady State and Transient Models): Description of Simplified Network Model of a Synchronous Machine (Classical Model), Description of Swing Equation (No Derivation) and State-SpaceII-Order Mathematical Model of Synchronous Machine. Modelling of Governor: Mathematical Modelling of Speed Governing System – Derivation of small signal transfer function. Modelling of Excitation System: Fundamental Characteristics of an Excitation system, Ttransfer function, Block Diagram Representation of IEEE Type-1 Model
UNIT – V Single Area Load Frequency Control
Necessity of keeping frequency constant.Definitions of Control area – Single area control – Block diagram representation of an isolated powersystem – Steady state analysis – Dynamic response – Uncontrolled case.
UNIT – VI Two-Area Load Frequency Control
Load frequency control of 2-area system – uncontrolled case and controlled case, tie-line bias control
UNIT-VII Load Frequency Controllers
Proportional plus Integral control of single area and its block diagram representation, steady stateresponse – Load Frequency Control and Economic dispatch control.
UNIT – VIII Reactive Power Control
Overview of Reactive Power control – Reactive Power compensation in transmission systems 
advantages and disadvantages of different types of compensating equipment for transmission systems;load compensation – Specifications of load compensator, Uncompensated and compensated transmission lines: shunt and Series Compensation.

ABOUT THE AUTHOR:
A PhD from MIT, J. Duncan Glover is President and Principal Engineer at Failure Electrical, LLC. Prior to forming Failure Electrical, LLC, Dr. Glover was a Principal Engineer at Exponent Failure Analysis Associates, a tenured Associate Professor in the Electrical and Computer Engineering Department of Northeastern University,
Mulukutla S. Sarma is the author of numerous technical articles published in leading journals, including the first studies of methods for computer-aided analysis of three-dimensional nonlinear electromagnetic field problems as applied to the design of electrical machinery. Sarma is a Life-Fellow of IEEE(USA), a Fellow of IEE(UK) and IEE(INDIA),
Posted by creativeworld9 at 1:00 PM
Labels, , , , ,

0 comments :

Post a Comment

Followers